Anker 14-in-1 A8389
Anker docking stations

Anker 14-in-1 A8389

The A8389 packs a broad peripheral selection into a portable hub. Its most important charging figure is 80W to the laptop, even though the power input can accept a 100W charger.

Check on AmazonAdd to comparison

As an Amazon Associate I earn from qualifying purchases. How our links work.

Consider it for

  • A portable Windows workspace after exact screen-mode verification
  • Users whose laptop charging demand fits an 80W ceiling

Check before buying

  • No multiple independent extended displays on macOS
  • Host output is 80W from a suitable 100W input

Leave room for the hub’s own power use

Anker allocates 20W from a suitable 100W supply to operating the hub, leaving up to 80W for the host. If your laptop already needs a full 100W supply, this is not equivalent to connecting that charger directly. Compare the actual laptop output with the charger recommendation in your computer’s manual.

Check the exact configuration and included power supply.

Check on Amazon

Three external screens depend on the Windows graphics system

The manufacturer’s multi-screen notes specify that the number of extended displays depends on the graphics card. They also say macOS does not support the multi-display extended mode. A diagram showing four screens can include the laptop panel; do not read it as four external monitors.

Sort power, data, and display cables before deployment

The PD input is charging-only, and the USB-A/USB-C data sockets do not carry monitor video. The attached host cable is roughly 20cm, making the location of a raised laptop stand relevant. This hub is best considered after you have an exact list of connections and have verified the simultaneous display mode. We keep it out of automatic display matching while a complete source-backed resolution table is pending.

Connections & compatibility

Connection to laptop
USB-C with native video support
Display technology
mst
Maximum displays (conditions apply)
3
Power to laptop (W)
80
HDMI sockets
Not confirmed in our sources
DisplayPort sockets
Not confirmed in our sources
Wired network
Confirm selected listing
USB peripherals
USB accessory connections; complete per-port table pending
Display requirements
Windows host graphics dependent; complete resolution matrix not encoded
Mac notes
Multi-display extended mode not supported
Windows notes
Supported Windows laptop with required video-capable port; simultaneous displays depend on host

These are published specifications, not results from hands-on testing. Maximum screen counts depend on the laptop, operating system, connection and chosen resolution.

Check your setup requirements

Sources & specifications

Research checked September 11, 2026. Product revisions, firmware and operating systems can change compatibility.

Review the current listing

Confirm model, condition, seller, included cables and power supply before ordering.

Check on Amazon

As an Amazon Associate I earn from qualifying purchases. How our links work.

Other Anker options

Anker 332 5-in-1 A8355
Anker

Anker 332 5-in-1 A8355

The Anker 332 is a straightforward way to add one HDMI screen, a few USB peripherals, and pass-through charging. It avoids the extra connectors of a large desktop dock, which is helpful when your actual setup is equally simple.

Up to 1 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon
Anker 553 8-in-1 A8380
Anker

Anker 553 8-in-1 A8380

The Anker 553 brings two HDMI outputs into a small hub, but the two outputs solve different problems on Windows and macOS. A Windows setup can extend separate desktops when the host supports the required video path; a Mac repeats the same content on both external screens.

Up to 2 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon
Anker 565 11-in-1 A8388
Anker

Anker 565 11-in-1 A8388

A mixed pair of monitors is a natural reason to consider the Anker 565: it has one HDMI and one DisplayPort socket instead of forcing two identical connectors. Its small format also collects audio, wired networking, and memory-card access.

Up to 2 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon

Understand the setup