Anker 332 5-in-1 A8355
Anker docking stations

Anker 332 5-in-1 A8355

The Anker 332 is a straightforward way to add one HDMI screen, a few USB peripherals, and pass-through charging. It avoids the extra connectors of a large desktop dock, which is helpful when your actual setup is equally simple.

Check on AmazonAdd to comparison

As an Amazon Associate I earn from qualifying purchases. How our links work.

Consider it for

  • A single HDMI presentation or reference screen
  • A small travel kit with USB-A peripherals

Check before buying

  • 4K output limited to 30Hz
  • No Ethernet or card reader; charger required for host power

Is 4K30 the right compromise?

The HDMI output is specified at up to 3840 × 2160 at 30Hz. That can be acceptable for a presentation or occasional static reference screen, but a buyer expecting the feel of a 60Hz desktop should choose a model explicitly supporting that mode. A 4K monitor accepting the signal does not make the refresh rate equivalent.

Check the exact configuration and included power supply.

Check on Amazon

The USB-C sockets have separate roles

One USB-C port accepts the power supply; another transfers data at up to 5Gbps. Two USB-A data ports handle existing peripherals. Plan which device goes where before assuming the charging input can be used as another data connection. There is no built-in Ethernet or card reader.

A small hub still needs a complete power plan

The maximum laptop charging figure is 85W from a suitable 100W PD supply. If you carry only the hub and leave the charger at home, you have not packed a powered docking station. The sensible use case is a modest one-screen arrangement where the selected laptop port already supports video and the remaining peripheral list fits within the available sockets.

Connections & compatibility

Connection to laptop
USB-C with video output
Display technology
native
Maximum displays (conditions apply)
1
Power to laptop (W)
85
HDMI sockets
1
DisplayPort sockets
0
Wired network
Not built in
USB peripherals
2 USB-A 5Gbps; 1 USB-C 5Gbps data
Display requirements
One HDMI screen up to 3840 × 2160 at 30Hz
Mac notes
One external display on a video-capable host
Windows notes
Supported Windows laptop with required video-capable port; simultaneous displays depend on host

These are published specifications, not results from hands-on testing. Maximum screen counts depend on the laptop, operating system, connection and chosen resolution.

Check your setup requirements

Sources & specifications

Research checked September 11, 2026. Product revisions, firmware and operating systems can change compatibility.

Review the current listing

Confirm model, condition, seller, included cables and power supply before ordering.

Check on Amazon

As an Amazon Associate I earn from qualifying purchases. How our links work.

Other Anker options

Anker 553 8-in-1 A8380
Anker

Anker 553 8-in-1 A8380

The Anker 553 brings two HDMI outputs into a small hub, but the two outputs solve different problems on Windows and macOS. A Windows setup can extend separate desktops when the host supports the required video path; a Mac repeats the same content on both external screens.

Up to 2 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon
Anker 565 11-in-1 A8388
Anker

Anker 565 11-in-1 A8388

A mixed pair of monitors is a natural reason to consider the Anker 565: it has one HDMI and one DisplayPort socket instead of forcing two identical connectors. Its small format also collects audio, wired networking, and memory-card access.

Up to 2 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon

Understand the setup