Anker Prime 14-in-1 A83B6
Anker docking stations

Anker Prime 14-in-1 A83B6

The Prime A83B6 is as much a desktop charging station as a dock. Its vertical enclosure combines an internal power module with monitor, data, and dedicated charging connections, but those connections are not interchangeable.

Check on AmazonAdd to comparison

As an Amazon Associate I earn from qualifying purchases. How our links work.

Consider it for

  • A charging-heavy Windows desk after exact display confirmation
  • Users replacing several dedicated accessory chargers

Check before buying

  • Conflicting official dual-resolution statements require confirmation
  • Mac external monitors mirror each other

Label the ports by purpose

Anker distinguishes USB-C data ports from IQ charging ports. The data ports do not provide display output, and the IQ ports do not transfer files. For a desk with phones, drives, and a laptop connected at once, this separation is more useful to understand than the total fourteen-port headline.

Check the exact configuration and included power supply.

Check on Amazon

Resolve the monitor specification before a two-screen purchase

The current official page advertises dual 4K60, while a later resolution section describes lower dual-display modes. Until Anker confirms your exact laptop and monitor combination, do not assume the highest claim applies. This model is excluded from automatic compatibility recommendations here for that reason.

A Mac is not a dual-independent-screen use case

Anker explicitly says both external Mac displays show the same content because macOS does not support the dock’s MST arrangement. The upstream host connection is rated at 100W maximum, within a 160W total charging budget. It may suit a supported Windows desk that also consolidates several chargers, but select it only after confirming the specific display requirement and how you will divide charging and data devices among the sockets.

Connections & compatibility

Connection to laptop
USB-C with DisplayPort Alt Mode
Display technology
mst
Maximum displays (conditions apply)
2
Power to laptop (W)
100
HDMI sockets
2
DisplayPort sockets
0
Wired network
Gigabit Ethernet
USB peripherals
1 USB-A 10Gbps; 3 USB-A USB 2.0; 2 USB-C 10Gbps data; separate charging ports
Display requirements
Manufacturer page has conflicting dual-resolution statements; confirm exact setup
Mac notes
Two external screens share one image
Windows notes
Supported Windows laptop with required video-capable port; simultaneous displays depend on host

These are published specifications, not results from hands-on testing. Maximum screen counts depend on the laptop, operating system, connection and chosen resolution.

Check your setup requirements

Sources & specifications

Research checked September 11, 2026. Product revisions, firmware and operating systems can change compatibility.

Review the current listing

Confirm model, condition, seller, included cables and power supply before ordering.

Check on Amazon

As an Amazon Associate I earn from qualifying purchases. How our links work.

Other Anker options

Anker 332 5-in-1 A8355
Anker

Anker 332 5-in-1 A8355

The Anker 332 is a straightforward way to add one HDMI screen, a few USB peripherals, and pass-through charging. It avoids the extra connectors of a large desktop dock, which is helpful when your actual setup is equally simple.

Up to 1 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon
Anker 553 8-in-1 A8380
Anker

Anker 553 8-in-1 A8380

The Anker 553 brings two HDMI outputs into a small hub, but the two outputs solve different problems on Windows and macOS. A Windows setup can extend separate desktops when the host supports the required video path; a Mac repeats the same content on both external screens.

Up to 2 displays*85W host power*

*Host, software and display conditions apply.

Check on Amazon

Understand the setup